 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ770 SPDT SUBMINIATURE POWER RELAY FEATURES 5 kV dielectric strength, 10 kV surge 8mm creepage and clearance Proof tracking index (PTI/CTI) 250 5 Amp switching (1 Form A: 20A inrush) Epoxy sealed version available Reinforced insulation, EN 60730-1 (VDE 0631, part 1), 1 Form A: EN 60335-1 (VDE 0700, part 1) * UL, CUR file E44211 * VDE file 40006815 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5A Max. switched voltage: 150 VDC* or 380 VAC * Note: If switching voltage is greater than 30 VDC, * * * * * * GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 106 1 x 105 at 5 A 250 VAC Res. 8 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge Voltage Coil to contact Insulation Resistance Insulation (according to DIN VDE 0110, IEC 60664-1) Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals 10,000V (at 1.2x50 s) 1000 megohms min. at 20C 500 VDC 50% RH C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Greater than 5% of nominal coil voltage At nominal coil voltage -40C (-40F) to 85C (185F) -40C (-40F) to 105C (221F) 0.062" (1.5 mm) DA at 10-50 Hz 10 g operating, 100 g damage P.B.T. polyester Tinned copper alloy, P. C. 270C (518F) 5 seconds 80C (176F) 30 seconds 4.6 grams 100 per plastic tray / 1000 per carton box Rated Load UL, CUR Form A (N.O.) 5 A at 250 VAC, Res., 100k cycles 5 A at 30 VDC, Res., 100k cycles 1/8 HP, 125 / 250 VAC, 100k cycles 3 A at 250 VAC, cos phi 0.4, 100k cycles C300 Pilot Duty, 125 / 250 VAC, 100k cycles TV-2, 120 VAC Form C 3 A at 250 VAC, Res., 100k cycles 3 A at 30 VDC, Res., 100k cycles VDE Material Resistance 5 A at 250 VAC, Res., 100k cycles at 85C Silver nickel, gold plating available < 100 milliohms initially COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise (at nominal voltage) Temperature 253 mW standard coil 113 mW sensitive coil 1.25 W at 20C (68F) ambient 41C (74F) standard coil 22C (40F) sensitive coil Max. 130C (266F) Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight Packing unit in pcs NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-08-04 Junkersstrasse 3, D-82178 Puchheim, Germany AZ770 RELAY ORDERING DATA STANDARD RELAYS - TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 36.0 Max. Continuous VDC 3.9 6.5 7.8 11.7 15.6 23.4 31.2 62.4 Coil Resistance Ohm 10% 20 55 80 180 320 720 1,280 5,120 15% ORDER NUMBER* Form A (SPST) AZ770-1A-3D AZ770-1A-5D AZ770-1A-6D AZ770-1A-9D AZ770-1A-12D AZ770-1A-18D AZ770-1A-24D AZ770-1A-48D Form C (SPDT) AZ770-1C-3D AZ770-1C-5D AZ770-1C-6D AZ770-1C-9D AZ770-1C-12D AZ770-1C-18D AZ770-1C-24D AZ770-1C-48D SENSITIVE RELAYS - TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 36.0 Max. Continuous VDC 5.1 8.5 10.2 15.3 20.4 30.6 40.8 81.6 Coil Resistance Ohm 10% 45 125 180 400 720 1,600 2,800 11,520 15% ORDER NUMBER* Form A (SPST) AZ770-1A-3DS AZ770-1A-5DS AZ770-1A-6DS AZ770-1A-9DS AZ770-1A-12DS AZ770-1A-18DS AZ770-1A-24DS AZ770-1A-48DS * Add suffix "E" for epoxy sealed version. Add suffix "K" for Type 2 footprint. Add suffix "G" for gold plated contacts. MECHANICAL DATA PC BOARD LAYOUT .703 Max [17.85] .407 Max [10.35] 5 x o .05 [o 1.3] .60 [15.24] .25 [6.35] * .157 [4.0] .03 [0.8] 5 x o .05 [o 1.3] .50 [12.7] .1 [2.54] .494 Max [12.55] .30 [7.6] .30 [7.6] * .06 [1.5] .157 [4] o .02 [o 0.5] 2 x .012 [0.3] .016 [0.4] Type 1 Viewed toward terminals Type 2 *Not used on Form A version Type 1 .703 Max [17.85] .407 Max [10.35] WIRING DIAGRAMS 3 3 .494 Max [12.55] 1 1 4 5 * 2 .157 [4] o .02 [0.5] 3 x .012 [0.3] 5 * 2 4 .016 [0.4] Type 1 .03 [0.8] Type 2 Viewed toward terminals *Not used on Form A version Type 2 Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-08-04 Junkersstrasse 3, D-82178 Puchheim, Germany |
Price & Availability of AZ770-1A-18D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |